In-Stock Aluminum Bi-Fold Patio Doors: Which Standard Configurations Are Ready to Ship and What Do They Cost?
Standard Gladiator aluminum bi-fold patio doors kept in stock ship significantly faster than made-to-order custom units — making them the right call for contractors and builders running tight schedules. This guide covers the exact widths, heights, panel counts, and factory-direct pricing you need to spec and order with confidence, plus everything to know about rough-opening planning and delivery timing.
What standard widths and heights are available for in-stock aluminum bi-fold patio doors?
Gladiator's in-stock aluminum bi-fold doors are available in a focused range of the most commonly requested widths and heights — the configurations that fit the vast majority of residential and light-commercial rough openings without custom fabrication. Standard widths run from roughly 6 ft (2-panel) up through 20 ft and beyond for multi-panel configurations, with the most popular in-stock units landing in the 8 ft – 16 ft range. Standard heights are typically 8 ft and 10 ft, covering the overwhelming majority of new-construction and remodel projects.
Frames are thermally broken aluminum, meaning the interior and exterior aluminum profiles are separated by a structural polymer barrier that interrupts heat transfer — a requirement on nearly every energy-conscious project, from California Title 24 compliance work to high-performance residential builds nationwide.
Key rough-opening and header considerations for standard sizes:
- Add 1 inch to the door width and ½ inch to the door height for a standard rough opening (verify against the spec sheet for the exact unit ordered).
- Multi-panel systems — especially those spanning 12 ft or more — require a properly engineered header. Plan for this early; it's the most common field delay on bi-fold installations.
- The low-profile flush bottom track on Gladiator bi-fold systems sits close to finished floor level, simplifying ADA-friendly threshold transitions on slab projects.
Browse current availability on the in-stock doors ready to ship page — configurations and quantities update as inventory moves.
How much do ready-to-ship aluminum bi-fold doors cost compared to custom-order units?
In-stock aluminum bi-fold doors are priced at factory-direct wholesale rates and are consistently less expensive than equivalent made-to-order custom units — both because standard production runs lower per-unit costs and because there are no upcharges for special-order lead times.
As a general framework for trade buyers:
- 2- and 3-panel in-stock units represent the most accessible entry point for factory-direct aluminum bi-fold pricing.
- 4- to 6-panel in-stock configurations offer the best cost-per-linear-foot value for mid-range opening widths — the sweet spot for most residential projects.
- Custom-order units carry longer lead times and typically a 15–25% premium over comparable in-stock configurations, depending on size, finish, and glass specification.
All Gladiator bi-fold doors ship with 6mm tempered glass standard — not 4mm or 5mm as commonly found in lower-tier systems. That thicker glass spec is included in the base price with no upcharge, and it meaningfully improves the acoustic performance and structural integrity of large panels. Combined with factory-direct pricing (no dealer margin, no distributor markup), the landed cost for contractors is substantially lower than sourcing through traditional dealer-network channels.
Free nationwide shipping is included on qualifying orders. For trade accounts with volume purchasing, wholesale pricing tiers are available — see the Reseller & Wholesale Application for details.
What panel counts are available in standard in-stock bi-fold door configurations?
Standard in-stock configurations most commonly include 2-, 3-, 4-, 5-, and 6-panel arrangements, with 4-panel being the highest-volume in-stock SKU due to its versatility across 12–16 ft openings. Here is how panel count maps to typical opening width and use case:
| Panel Count | Typical Opening Width | Best Use Case | Glass Spec | Frame |
|---|---|---|---|---|
| 2-Panel | ~6 ft – 8 ft | Narrow patio or secondary access | 6mm tempered | Thermal-break aluminum |
| 3-Panel | ~9 ft – 12 ft | Single-room indoor-outdoor transition | 6mm tempered | Thermal-break aluminum |
| 4-Panel | ~12 ft – 16 ft | Main living area, most popular in-stock SKU | 6mm tempered | Thermal-break aluminum |
| 5-Panel | ~16 ft – 20 ft | Large living room or entertainment space | 6mm tempered | Thermal-break aluminum |
| 6-Panel | ~20 ft – 24 ft | Open-plan living, indoor-outdoor great room | 6mm tempered | Thermal-break aluminum |
Panel stacking direction (left or right) is specified at order. For odd-panel configurations, the active door leaf — the walk-through panel — is built into the design and does not require a separate door unit. All standard configurations are available in matte black, dark grey RAL 7016, white RAL 9010, and bronze anodized finishes; availability by finish varies by in-stock quantity.
For the full current list of panel configurations in stock, check the in-stock bi-fold doors page directly — it reflects live inventory.
How quickly can in-stock aluminum bi-fold doors be delivered to a job site?
In-stock aluminum bi-fold doors ship substantially faster than custom-fabricated units — that is the core operational advantage for contractors managing scheduled dry-in or finish deadlines. While we do not publish guaranteed delivery windows (transit times vary by destination and carrier), in-stock units leave our warehouse far sooner than custom orders, which carry fabrication lead times measured in weeks.
Practical logistics guidance for trade buyers:
- Order early in the project schedule. Even in-stock units require freight coordination; large multi-panel systems ship on pallets via LTL freight and need a receiving plan on the job site.
- Confirm rough opening dimensions before ordering. Returns and re-orders on oversized units cost more time than any lead-time advantage gained by ordering early without confirmed dimensions.
- Freight delivery to job sites: LTL freight carriers typically require a person present and a clear unloading area. Liftgate service may be needed for sites without a loading dock — flag this when ordering.
- Free nationwide shipping is included on qualifying orders, covering all 50 states.
Trade and wholesale account holders get priority order processing and direct support from our team — another reason high-volume builders and developers apply for a wholesale account before their first project, not after.
Are standard-size aluminum bi-fold doors a good option for large openings, or do most projects require custom sizing?
Standard in-stock configurations cover the majority of residential patio and indoor-outdoor opening widths, but very large or architecturally specific openings often require custom sizing. Here is a practical breakdown to help you decide:
When standard in-stock sizes work well:
- New-construction projects where the rough opening can be framed to match a standard door size — the most cost-efficient and fastest approach.
- Remodel projects where the existing opening falls within the 6 ft – 24 ft width range covered by 2- to 6-panel configurations.
- Projects where a standard 8 ft or 10 ft height works with the ceiling plan.
- Multi-unit residential and light commercial builds where multiple units of the same configuration are needed — in-stock inventory means consistent lead times across all units.
When custom sizing is the right call:
- Openings wider than what standard panel configurations cover — 7-, 8-, or more panel systems for openings exceeding 24 ft.
- Non-standard heights above 10 ft (e.g., 11 ft, 12 ft for high-volume residential or commercial builds).
- Corner bi-fold configurations, which by definition require custom fabrication.
- Projects with specific U-factor or SHGC targets that require a non-standard glass package beyond the standard 6mm tempered spec.
The smart move for builders on larger projects: frame the rough opening to a standard size wherever possible, order in-stock, and reserve custom fabrication for openings where there is no practical standard equivalent. For large-panel aluminum bi-fold doors at any configuration, Gladiator's factory-direct model means custom pricing is still more competitive than sourcing standard product through a dealer-network brand.
If your project also involves adjacent openings — sliders for flanking walls, pivot entries, or folding passthrough windows for a bar or servery — Gladiator's full system lineup lets you match frames and finishes across product types. See the full range: sliding glass doors, pivot doors, and folding passthrough windows.
Sell Gladiator doors at a wholesale price. Factory-direct aluminum sliding, bi-fold, and pivot doors — premium aluminum, 6mm glass, low-profile tracks, no upcharges, shipped nationwide. Contractors, builders, designers, and retailers get trade pricing and real support.
Apply for a Reseller & Wholesale Account · Call 904-822-1078